 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute Approval Specification TO: Part No: SP959.0B01-TD01 Customer's Part Customer's Approval Certificate Please return this copy as a certification of Your approval Checked & Approval Date P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: sawmkt@sipat.com SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute Approved by: Checked by: Issued by: SPECIFICATION MODEL SP959 SURFACE ACOUSTIC WAVE FILTER P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: sawmkt@sipat.com SIPAT Co.,Ltd 1. Package Dimension (F-11 ) www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute Unit: mm Pin No. Functions 1. 2. 3. 4. Input Ground Ground Output 2. Marking D 959 D3 (1) Color: Black or Blue (2) D: SIPAT Manufacture's logo (3) 959: Center Frequency (MHz) (4) D3: Date code D Month code Month Month code 1 A 2 B 3 C 4 D 3 Last figure of year 5 E 6 F 7 G 8 H 9 10 11 12 I J K L e.g.: " D3 " means April of 2003 P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: sawmkt@sipat.com SIPAT Co.,Ltd 3. Performance 3.1 Application Low-Loss SAW Filter of Cordless Phone System. Center Frequency: 959.0 MHz. 3.2 Maximum Rating Operation Temperature Storage Temperature Range DC Permissive Voltage Maximum Input Power www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute -10 to +60 -25 to +70 10V DC max. 0 dBm 3.3 Electronic Characteristics Item Center Frequency ( fo ) Passband Width Insertion Loss Ripple Deviation Stop Band Suppression Frequency (MHz) 959.0 fo1.0 Passband Passband fo-46 ~ fo-41 fo-23fo-20 fo+20 ~ fo+23 Specification 3.5 dB max. 1.5 dB max. 40 30 20 40 dB dB dB dB min. min. min. min. Terminating Impedance 50 + j60.3 P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: sawmkt@sipat.com SIPAT Co.,Ltd 3.4 Frequency Characteristics www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute 3.5 Test Circuit P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: sawmkt@sipat.com SIPAT Co.,Ltd 4. Reliability www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute 4.1 Mechanical Shock: The components shall remain within the electrical specifications after 1000 shocks, acceleration 392m/s2, duration 6 milliseconds.. 4.2 Vibration Fatigue: The components shall remain within the electrical specifications after loaded vibration at 10120 Hz, amplitude 1.5 mm, X,Y,Z, direction, for 2 hours. 4.3 Terminal Strength: The components shall remain within the electrical specifications after pulled 2 kgs weight for 10 seconds towards an axis of each terminal. 4.4 High Temperature Storage: The components shall remain within the electrical specifications after being kept at the 852for 960 hours, then kept at room temperature for 2 hours. 4.5 Low Temperature Storage: The components shall remain within the electrical specifications after being kept at the -252 for 960 hours, then kept at room temperature for 2 hours. 4.6 Temperature Cycle: The components shall remain within the electrical specifications after 5 cycles of high and low temperature testing ( one cycle: 80 for 30 minutes 25 for 5 minutes-25for 30 minutes )than kept at room temperature for 2 hours. 4.7 Humidity Test: The components shall remain within the electrical specifications after being kept at the condition of ambient temperature 402, and 90 95% RH for 9605 hours, then kept at room temperature and normal humidity for 1.5 hours. 4.8 Solder-heat Resistance: The components shall remain within the electrical specifications after dipped in the solder at 3505for 51 seconds, then kept at room temperature for 10 mins. (Terminal must be dipped leaving 1.5 mm from the case). 4.9 Solderability: Solderability of terminal shall be kept at more than 80% after dipped in the solder flux at 2305 for 51 seconds. 4.10 Storage: The components shall meet the electrical and mechanical specifications after 5 years storage, if stored within the temperature range of -20 +60and in the humidity of 20 to 60% r.h. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: sawmkt@sipat.com SIPAT Co.,Ltd 5. Remarks www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute 5.1 Static voltage Static voltage between signal load & ground may cause deterioration & destruction of the component. Please avoid static voltage. 5.2 Ultrasonic cleaning Ultrasonic vibration may cause deterioration & destruction of the component. Please avoid ultrasonic cleaning. 5.3 Soldering Only leads of component may be soldered. Please avoid soldering another part of component. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: sawmkt@sipat.com |
Price & Availability of SP959B01-TD01
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |